Special Finishes

Architectural and Decorative Coating Specialists

Colourtrend Acrylic PaintsColourtrend Acrylic Paints

Solvent Sealer

Print this page Save this page as a PDF Product enquiry

Description:

Solvent Sealer is a low viscosity solvent base clear acrylic sealer used for sealing fibrecement board, concrete, cement plasters etc.

Uses:

Solvent Sealer is ideal as a sealer coat on fibrecement board including the jointing prior to application of the jointing compound and cement plasters such as Strongwall.

It is suitable as sealer for concrete, cement plaster and fibrecement board prior to application of paint based tetures such as Texturecoat and Shieldtex High Build.

It is also suitable as a dust sealer for concrete floors.

Application:

Apply one coat of Solvent Sealer at a coverage rate of 4-6m2/litre to all surfaces prior to application of jointing compound, plasters or teture.

For dust sealing of concrete apply a further coat at 4-6 m2/litre

Apply by brush, roller or spray.  No thinning in necessary.

Allow to dry minium of two hours before overcoating.

Caution:

Product contains flammable liquid.  Keep away from sparks and open flames.  Do not smoke during use.  Keep out of reach of children.  Avoid breathin gvapours.  Contains aromatic hydrocarbon solvents.  Do not apply in confined spaces without appropriate breathing apparatus.  Wear gloves, gogles and protective clothing during use.  Excessive skin contact may cause dematitis.

Class 3B Flammable Liquid.

Warranty / Liability

Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.