Acrylic Hi Build Texture finish in fine, medium or coarse.
Suitable as a long life durable coating on most substrates to
produce a flexible waterproof finish. Available in a wide
range of BSS 5252 colours.
Commercial and residential application over concrete - walls,
beams and columns, concrete blocks and fibre cement sheeting with
joints taped or fushed using Colourworld NZ Limited sytems.
A very flexible Hi Build Acrylic, containing granulated marble
giving excellent abrasion resistance, outstanding exterior
durability and water resistance. Minimal dirt retention
depending on the roughness of texture and glze finish which can be
specified in varying degress of gloss.
By a colourworld NZ Limited Licensed Applicator by Hopper Gun -
although Texturecoat can be rolled or trowelled.
Various substrates require sealing prior to application of the
Texturecoat - most surfaces such as concrete plaster and cement
coatings and fibre cement sheeting should be sealed with
Colourworld NZ Limited Pigmented Acrylic Sealer. Concrete
blocks are sealed with Shieldtex Block Sealer - a Hi Build Fibre
filled coating. Timber should be primed prior to
over-coating. Refer to Special Finishes data sheet regarding
sealers to obtain the correct recommendation.
Teturecoat recommended coverage is 1-1 1/2 m2 per litre
| Film Build |
1-3 mm depending on texture |
| Applied by |
Spray or Roller |
| Thinning and Clean up |
Water |
| Drying time |
1-2 hours |
Can be over-coated in Acrylic Glaze or we recommend Ultra Glaze
for etended durability. Both are available in varying degress
of gloss. Refer to the relevant Colourworld NZ Limited data
sheets.
A free technical and advisory service is available from
Colourworld NZ Limited, or your Licensed Applicator who can quote
to apply the Texturecoat.
Warranty / Liability
Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.