Polysild is a 100% Pure Acrylic extremely high quality
waterbased paint system that displays exceptional water resistance
and extior/interior durability. Polysild offers excellent
resistance to water, ultra violet light degradation, blocking and
dirt pick-up, and is particularly suited for use on roofs, factory
walls, houses, etc.
- Polysild is a low sheen finish
- Has excellent wash and wear characteristics and the durability
of a high gloss finish
- Provides exceptional ultra-violet light, fleibility, and long
term protection to all substrates.
Roor Coatings, StrongwallCladding System, Stucco, Weatherboards,
Harditex, Block Buildings, Concrete Substrates, Galvanised Iron,
Roofs, Tile Roofs, and on any timber surface.
Lounges, Walls, Ceilings,Bathrooms, Laundries, Gib-board,
Hospitals, Schools, Factories, Offices, Shopping Complees, or any
place requiring a low sheen with was and wear scrubability.
| Application |
Brush, roller, spray, airless |
| Coverage |
6-10 m2 per litre, depending on substrate, texture - on
Teroleon Stucco Concrete Finish allow 2 m2 per litre per coat |
| Touch Dry |
1 hour, depending on ambient temperature and relative
humidity |
| Recoat |
3 - 6 hours |
| Number of Coats |
2 coats, depending on substrate - on new concrete, Strongwall
Sealer should be used |
| Clean Up |
Water |
| Packaging |
4 litre, 10 litre & 20 litre plastic pails |
| M.S.D.S. |
Available on request
Non-Flammable, Non-Toxic, Non-Hazardous
|
Warranty / Liability
Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.